Я пишу сценарий сборки виртуальной машины Hyper-V и хотел добавить функцию выбора SSD, где это возможно, чтобы расставить приоритеты для небольших и наиболее часто используемых виртуальных машин. Впервые я нашел путь от Scripting Guys здесь: http://blogs.technet.com/b/heyscriptingguy/archive/2013/03/17/powertip-use-powershell-to-identify-ssd.aspx, но я не смог найти ничего, что помогло бы мне пройти весь путь, поэтому я использовал WBEMTEST, чтобы найти классы, которые мне нужно было запросить, чтобы установить соединение между диском SSD и рассматриваемой буквой диска.
Нажмите Пуск --> Выполнить --> введите WBEMTEST --> Убедитесь, что для пространства имен задано значение root\cimv2, и нажмите Подключить --> Enum Classes --> Recursive --> OK. Примерно через 5 секунд список будет полностью заполнен, что позволит вам щелкнуть элемент списка. Нажмите на элемент списка, а затем нажмите букву W, чтобы перейти к Win32 и найти его для просмотра, затем нажмите «Добавить». Затем отображаются доступные свойства и методы.
Приведенная ниже функция IsSSDDrive возвращает $True или $False в зависимости от того, подключена ли данная буква диска (включая двоеточие, например, C:) к твердотельному диску (SSD) — при условии, что производитель вставил буквы SSD в имя устройства. Это предположение в конечном итоге делает этот метод ненадежным, поэтому было бы разумно включить некоторый код для перекрестной проверки, используя что-то вроде:
$DiskScore = (Get-WmiObject -Class Win32_WinSAT).DiskScore
If ($DiskScore -gt 6.9) { $SystemHasSSDDrive=$True } Else { $SystemHasSSDDrive=$False }
Write-Host "System Has SSD Drive: $SystemHasSSDDrive"
...если в вашей среде используются такие диски.
Function IsSSDDrive($Drive)
# Returns $True or $False depending on whether the given drive letter (including colon - e.g. C:) is mounted on a Solid State Disk (SSD) - assuming that the manufacturer inserted the letters SSD into the device name - which ultimately makes this method unreliable so beware to cross check using something like $DiskScore = (Get-WmiObject -Class Win32_WinSAT).DiskScore # Thanks to Rens Hollanders for this! http://renshollanders.nl/2013/01/sccm-mdt-identifying-ssds-from-your-task-sequence-by-windows-performance-index/
{
[array] $SSDDeviceIDList = $Null
[array] $SSDDeviceIDListF = $Null
[array] $DDListF = $Null
[array] $SSDDriveLetters = $Null
# Build a list of DeviceIDs of disk drives that contain the string SSD. Example output: \\.\PHYSICALDRIVE0, \\.\PHYSICALDRIVE1 etc
$SSDDeviceIDList = Get-WmiObject Win32_DiskDrive | where { $_.model -match 'SSD'} | Select 'DeviceID'
#$SSDDeviceIDList
# Fix the list by removing the \\.\ from each of the obtained \\.\PHYSICALDRIVEx values
ForEach ($SSDDeviceID in $SSDDeviceIDList) {
$SSDDeviceIDListF += $SSDDeviceID.DeviceID.ToString().Replace("\\.\","")
}
#$SSDDeviceIDListF
# Obtain disk drive to disk partition mapping information. Section of sample output for a single partition:
#Antecedent : \\MyComputerName\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"
#Dependent : \\MyComputerName\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #2"
$DDList1 = $null ; $DDList1 = Get-WmiObject Win32_DiskDriveToDiskPartition
# Look at each partition
ForEach ($Disk in $DDList1) {
# Iterate through the previously collected list of filtered (SSD in the name) hard drives
ForEach ($SSDDeviceID in $SSDDeviceIDListF) {
# If the partition is found with a property that matches the deviceID of the known-SSD list, then add the partition dependent information to the filtered (SSD) list of disk drives (DDListF)
If ($Disk.Antecedent.Contains($SSDDeviceID)) { $DDListF += $Disk.Dependent.Split([Char]34)[1] }
}
}
#$DDListF
# Obtain disk drive to disk partition mapping information. We need to do this because the drive letter attribute is not present in Win32_DiskDriveToDiskPartition and the physical disk is not present in Win32_LogicalDiskToPartition.
# Section of sample output for a single partition:
# Antecedent : \\MyComputerName\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #2"
# Dependent : \\MyComputerName\root\cimv2:Win32_LogicalDisk.DeviceID="I:"
$LDPList = Get-WmiObject Win32_LogicalDiskToPartition
# Look at each existing partition (on all drives)
ForEach ($Partition in $LDPList) {
# Iterate through the list of filtered SSD partitions
ForEach ($DDL in $DDListF) {
# If the disk-partition information from the SSD filtered list is found in the current partition then add the current partition's drive letter to the list of SSD drive letters
If ($Partition.Antecedent.Contains($DDL)) { $SSDDriveLetters += $Partition.Dependent.Split([Char]34)[1] }
}
}
$IsSSD = $False
If (!($SSDDriveLetters -eq $Null)) {
ForEach ($Item in $SSDDriveLetters) {
If ($Drive.ToUpper() -eq $Item.ToUpper()) {
$IsSSD = $True
break
}
}
}
Return $IsSSD
}
$d = IsSSDDrive "D:" # Returns True if the given drive letter resides on a disk with a name containing the letters SSD.
$d
$c = IsSSDDrive "C:"
$c